Cannot load certain grib files
Posted: 03 Apr 2012 18:44
Hi forum,
Using zyGrib 3.9.2 on Ubuntu oneiric 64bit I get the following error when trying to load a GRIB-file issued by the Croatian Hygrological Center (DHMZ) I get the following error in a popup window:
"File xyz.grb - Cannot open file - it's not a GRIB file or contains unrecognized data or ..."
The same file opens fine in other GRIB viewers and OpenCPN on Ubuntu.
The terminal shows the following information when trying to load the GRIB file:
====== GribRecord 1 : verticalDataAreMirrored()
idCenter=221 idModel=1 idGrid=255
dataType=33 levelType=105 levelValue=10
hour=0
sav xmin=14,525000 xmax=17,875000 ymin=44,374000 ymax=41,926000
final xmin=14,525000 xmax=17,875000 ymin=41,926000 ymax=44,374000
Ni=135 Nj=137
hasDiDj=1 Di,Dj=(0,025000 0,018000)
final Di,Dj=(0,025000 0,018000)
hasBMS=0 isScanIpositive=1 isScanJpositive=0 isAdjacentI=1
====== GribRecord 1 : translateDataType() : Unknown GribRecord
idCenter=221 idModel=1 idGrid=255
dataType=33 levelType=105 levelValue=10
hour=0
sav xmin=14,525000 xmax=17,875000 ymin=44,374000 ymax=41,926000
final xmin=14,525000 xmax=17,875000 ymin=41,926000 ymax=44,374000
Ni=135 Nj=137
hasDiDj=1 Di,Dj=(0,025000 0,018000)
final Di,Dj=(0,025000 0,018000)
hasBMS=0 isScanIpositive=1 isScanJpositive=0 isAdjacentI=1
... same information repeated for every record up to record 146, followed by:
DBG MblueReader.cpp: 36: openFile(): MblueReader::loadFile 'xyz.grb'
DBG Terrain.cpp: 563: loadMeteoDataFile(): ERROR: unknown file type
File is attached.
Any hints?
thx a lot,
franz
Using zyGrib 3.9.2 on Ubuntu oneiric 64bit I get the following error when trying to load a GRIB-file issued by the Croatian Hygrological Center (DHMZ) I get the following error in a popup window:
"File xyz.grb - Cannot open file - it's not a GRIB file or contains unrecognized data or ..."
The same file opens fine in other GRIB viewers and OpenCPN on Ubuntu.
The terminal shows the following information when trying to load the GRIB file:
====== GribRecord 1 : verticalDataAreMirrored()
idCenter=221 idModel=1 idGrid=255
dataType=33 levelType=105 levelValue=10
hour=0
sav xmin=14,525000 xmax=17,875000 ymin=44,374000 ymax=41,926000
final xmin=14,525000 xmax=17,875000 ymin=41,926000 ymax=44,374000
Ni=135 Nj=137
hasDiDj=1 Di,Dj=(0,025000 0,018000)
final Di,Dj=(0,025000 0,018000)
hasBMS=0 isScanIpositive=1 isScanJpositive=0 isAdjacentI=1
====== GribRecord 1 : translateDataType() : Unknown GribRecord
idCenter=221 idModel=1 idGrid=255
dataType=33 levelType=105 levelValue=10
hour=0
sav xmin=14,525000 xmax=17,875000 ymin=44,374000 ymax=41,926000
final xmin=14,525000 xmax=17,875000 ymin=41,926000 ymax=44,374000
Ni=135 Nj=137
hasDiDj=1 Di,Dj=(0,025000 0,018000)
final Di,Dj=(0,025000 0,018000)
hasBMS=0 isScanIpositive=1 isScanJpositive=0 isAdjacentI=1
... same information repeated for every record up to record 146, followed by:
DBG MblueReader.cpp: 36: openFile(): MblueReader::loadFile 'xyz.grb'
DBG Terrain.cpp: 563: loadMeteoDataFile(): ERROR: unknown file type
File is attached.
Any hints?
thx a lot,
franz